logo_ROB ROB GNSS
Research Group
logo_STCE Solar-Terrestrial
Centre of Excellence (STCE)

News

  Mon, 25 February 2019 [BSW52 Modifications]: The bug fix B_092 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_092 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The action of GPSEST in case of missing satellite/receiver clocks in the apriori clk file is not in all cases correctly reported in the output file - this is only a comment problem.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 25 February 2019 [BSW52 Modifications]: The bug fix B_093 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_093 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Added support for RINEX v3.03

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 25 February 2019 [BSW52 Modifications]: The bug fix B_094 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_094 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Support of 0.5 degree zenit intervals in ANTEX file.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 25 February 2019 [BSW52 Modifications]: The bug fix B_095 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_095 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Bugfix regarding observable selection in RNXSMT when using an observation selection priority file for GLONASS.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 25 February 2019 [BSW52 Modifications]: The bug fix B_091 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_091 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: RUNBPE.pm signals use of deprecated feature in regex.(see *.LOG files in the campaign s BPE directory). This will lead to an error if newest perl version is used (perl 5.26).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 18 May 2018 [BSW52 Modifications]: The bug fix B_090 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_090 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If Rinex navigation ephemeris (broadcast, BRD) data from GPSweek 2000 or newer is used, BRDTST and RNXPRE issue an error and execution is stopped.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 18 January 2018 [BSW52 Modifications]: The bug fix B_089 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_089 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If not all stations are selected in the program NUVELO wrong coordinates are used for obtaining the station velocities from the plate velocity model.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 28 September 2017 [BSW52 Modifications]: The bug fix B_086 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_086 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The DCB settings are checked and adjusted if Galileo observations are processed.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 28 September 2017 [BSW52 Modifications]: The bug fix B_087 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_087 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Only satellites with entries in the satellite information file are considered from the TAB/PRE files.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 28 September 2017 [BSW52 Modifications]: The bug fix B_088 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_088 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Observations were skipped, if a Rinex epoch contained data of more than 40 satellites (Warning message from SR R2RDOR).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 28 September 2017 [BSW52 Modifications]: All bug fixes from RELEASE_2017-08-28 provided by the BSW Team have been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug RELEASE_2017-08-28 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The complete update release 2017-08-28 provided by the BSW team was implemented.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 21 August 2017 [BSW52 Modifications]: The bug fix B_084 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_084 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Check the datum string for the coordinate/velocity files when importing SINEX files.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 21 August 2017 [BSW52 Modifications]: The bug fix B_085 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_085 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If GPS+GLONASS+Galileo are processed together and in panel "GPSEST 3.2.1.1 Extended Program Output Options" the "Satellite elevations" is selected the program will crash.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 14 August 2017 [BSW52 Modifications]: The bug fix B_083 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_083 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Program CODSPP may fail while writing the satellite-specific statistics into the program output file. This only happens when a satellite system is "left out" (e.g., processing of GPS+Galileo, with GLONASS satellites in between left out or missing).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 10 July 2017 [BSW52 Modifications]: The bug fix B_082 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_082 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Segmentation fault caused in program CPFSP3 on Debian linux 64-bit (4.9.2-10) compiled with gfortran (gcc 4.9.2). We thank Dr. Luciano Mendoza from the National University of La Plata, Argentina, for reporting this bug and suggesting a correction.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 4 July 2017 [BSW52 Modifications]: The bug fix B_081 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_081 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If "97" is used in "SATELLITE-SPECIFIC PARAMETER SETUP" of "GPSEST 6.3.2: Satellite Orbit Determination 2", the shadow entry/exit times may occasionally be incorrect, leading to setting the stochastic pulses at wrong epochs. STDELE may incorrectly put the "E" flags indicating eclipsing satellites in its output.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 24 April 2017 [BSW52 Modifications]: The bug fix B_080 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_080 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The listing of satellites in the program STDDIF is limited to 60, which is extended now.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_079 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_079 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Satellite PCO/PCV could get lost when converting ANTEX-files to Bernese PCV format.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_078 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_078 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: In the resulting coordinate file the datum string from the first input file is expected.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_077 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_077 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Allow for SP3d input files; check the format limitations regarding SP3c when writing precise orbit files.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_076 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_076 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The latest C04 pole files from IERS refer to ITRF2014 reference frame what is indicated in the header accordingly. The format detection in the Bernese GNSS Software has to be adapted to accept this new header string.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_075 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_075 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If more than two frequencies are given for GPS in the phase eccenter file (e.g., from Chamber calibrations), no PCVs are applied for the second frequency (at least is some cases). If this happen you will see a significant influence on the station coordinates.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_074 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_074 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The header record "GLONASS COD/PHA/BIA#" in RINEX3 observation files is not correctly identified.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: The bug fix B_073 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_073 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The warning message regarding the consistency of the datum string in the two coordinate files may be misleading when PSD corrections are applied.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 14 March 2017 [BSW52 Modifications]: All bug fixes from RELEASE_2016-12-16 provided by the BSW Team have been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug RELEASE_2016-12-16 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The complete update release 2016-12-16 provided by the BSW team was implemented.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 30 November 2016 [BSW52 Modifications]: The bug fix B_072 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_072 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: When extracting Bernese from IERS pol information the first epoch might be reported twice in the resulting ERP file. If the pole information is not continuous between consecutive days this may cause a degradation of the orbit fit.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 14 November 2016 [BSW52 Modifications]: The bug fix B_071 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_071 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Bugfix concerning RINEX 3 entries of in Bernese 5.2 not supportet GNSS systems.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 23 May 2016 [BSW52 Modifications]: The bug fix B_069 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_069 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Decrease default sigma for the no-scale-change condition in the minimum constrained solution (YES for scale in panel ADDNEQ2 5 Datum definitzion for station coordinates/velocities).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 20 May 2016 [BSW52 Modifications]: The bug fix B_070 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_070 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The minimum or maximum residual in the program output may be zero instead of the correct value in some cases.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 13 May 2016 [BSW52 Modifications]: The bug fix B_068 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_068 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Allow for more than 1000 stations.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 11 February 2016 [BSW52 Modifications]: The bug fix B_067 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_067 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Wrong ERP transformation when comparing orbits in the Earth fixed frame (Option "Use pole file accompanying the standard orbit" activated).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 19 January 2016 [BSW52 Modifications]: The bug fix B_066 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_066 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: RNXSMT stops with an error if the RINEX3 file contains an event 4 section.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 5 January 2016 [BSW52 Modifications]: The bug fix B_065 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_065 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Ionosphere result files contain only the improvement with respect to an a priori ionosphere model.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 5 January 2016 [BSW52 Modifications]: The bug fix B_064 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_064 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Satellite antenna offsets are not updated in ADDNEQ2 if they are setup per satellite.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 5 January 2016 [BSW52 Modifications]: The bug fix B_063 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_063 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: RINEX 3 file support.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 29 October 2015 [BSW52 Modifications]: The bug fix B_062 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_062 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Stations within one degree south of the Equator get a wrong sign in the SITE/ID block of the SINEX file.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 6 October 2015 [BSW52 Modifications]: The bug fix B_061 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_061 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: With this change in MAUPRP a baseline/station in indicated for removal by MPRXTR if the screening procedure did flag all observations as "bad".

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 1 October 2015 [BSW52 Modifications]: The bug fix B_060 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_060 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: ATX2PCV complains about incomplete record in the ATX file if entries for "unknown" GNSS are contained (e.g., the latest ATX-files directly published by the IGS contain IRNSS related records).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 7 August 2015 [BSW52 Modifications]: The bug fix B_059 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_059 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: A memory leak during RINEX3 read was caused by a pointer de-allocation issue (updated files: D_RINEX3.f90, RDR3OH.f90, RDR3OR.f90).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 27 May 2015 [BSW52 Modifications]: The bug fix B_057 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_057 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If the first epoch from the RINEX header is incosistent with the first epoch in the data part the option "normalize limits for non-daily session processing" may not be work as expected.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 27 May 2015 [BSW52 Modifications]: The bug fix B_058 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_058 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: In some very specific cases (when a sequence of subsequent cycle slip corrections is detected and indicated) an ambiguity may get lost.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Sat, 2 May 2015 [BSW52 Modifications]: The bug fix B_056 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_056 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The residual computation in ORBGEN was performed incorrectly. This caused the residuals to become acceptably small only after a larger number of iterations, even though the orbits converged much faster.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 27 April 2015 [BSW52 Modifications]: The bug fix B_055 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_055 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: In some cases (likely compiler dependent) ORBGEN complains about a missing entry in the satellite information file for the last epoch of an arc if the validity interval for this particular satellite closes at this epoch.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Sat, 25 April 2015 [BSW52 Modifications]: The bug fix B_054 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_054 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If the option "Epoch parameters only from phase" in panel "GPSEST 6.7: General Options for Epoch Parameters" is enabled but only code data are selected for processing, no solution is provided. With this patch this option is ignored in that case.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 10 March 2015 [BSW52 Modifications]: The bug fix B_053 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_053 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: There may appear fractionals of microseconds in the epochs of SP3 files that result from the number of available digits in Fortran real numbers.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 6 March 2015 [BSW52 Modifications]: The bug fix B_052 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_052 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The selection of grid cells may accept the neighboring cell if two stations are closer than half of the cell width in north south direction. A description to the corresponding correction is available at BSW mail 339 on our BSWmail page.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 4 March 2015 [BSW52 Modifications]: The bug fix B_050 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_050 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Use a new IGRF-release to compute the HOI corrections.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 4 March 2015 [BSW52 Modifications]: The bug fix B_051 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_051 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The date of calibration is taken from the ANTEX into the Bernese PCV file to allow an update procedure with the most recent calibration. With this improvement, the routine for reading ANTEX files stops if no date is given. At the same time, the specification of the calibration method is checked.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 25 February 2015 [BSW52 Modifications]: All bug fixes from RELEASE_2015-02-05 provided by the BSW Team have been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug RELEASE_2015-02-05 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The complete update release 2015-02-05 provided by the BSW team was implemented.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 12 January 2015 [BSW52 Modifications]: The bug fix B_049 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_049 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: New Empirical CODE Orbit Model (ECOM) has been implemented and used by CODE for official IGS products since January 2015. Affected program: ORBGEN.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 1 January 2015 [BSW52 Modifications]: The bug fix B_048 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_048 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Init new antenna number consistently with ATX2PCV.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 1 January 2015 [BSW52 Modifications]: The bug fix B_047 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_047 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Add calibration method "FIXED".

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 1 January 2015 [BSW52 Modifications]: The bug fix B_046 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_046 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Increase several arrays.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 1 January 2015 [BSW52 Modifications]: The bug fix B_045 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_045 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Consequently allow for four digits to identify a normal equation input file in ADDNEQ2.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 1 January 2015 [BSW52 Modifications]: The bug fix B_044 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_044 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Strong relative constraints specified in the station information file (TYPE 004) are reported as zero in the ADDNEQ2 program output.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 16 December 2014 Carine Bruyninx receives the Ivan I. Mueller Award of the American Geophysical Union (AGU) By Eric Pottiaux

Dr. Carine Bruyninx, responsible for the GNSS (Global Navigation Satellite System) research group of the Royal Observatory of Belgium, has received on Dec. 16, 2014 in San Francisco, the Ivan I. Mueller Award of the Geodesy Section of the American Geophysical Union (AGU).

This high-level recognition has been awarded to Carine Bruyninx for her leadership in space geodesy and devotion to the scientific GNSS community and its related services, in particular for her role as Network Coordinator of the EUREF (European Reference Frame) Permanent GNSS Network (EPN) since 1996 and as head of the EPN Central Bureau now.

The EPN is the backbone of the European Terrestrial Reference Frame used for georeferencing in Europe.

  Sat, 13 December 2014 [BSW52 Modifications]: The bug fix B_043 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_043 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Deactivate the GNSS satellite clock field if baseline observation files are processed.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 5 December 2014 [BSW52 Modifications]: The bug fix B_040 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_040 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Dimension of all RINEX2 file types are handled in one place.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 5 December 2014 [BSW52 Modifications]: The bug fix B_041 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_041 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The criteria to select RINEX observation files in RNXGRA may now be autmatically adjusted according to the length of the data to be processed. The same input values may now be used for daily and hourly processing schemes because they may now automatically be adjusted.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 5 December 2014 [BSW52 Modifications]: The bug fix B_042 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_042 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If an ORBGEN is asking for an entry in the radiation pressure section of the satellite information file that is not available (what should of course not happen) some illegal memory access happen (with unpredictable consequences).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 2 December 2014 [BSW52 Modifications]: The bug fix B_039 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_039 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The verification of available GNSS in the zero-difference observation files in the program SNGDIF only depends on the availability of the last satellite per system.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 28 November 2014 [BSW52 Modifications]: The bug fix B_035 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_035 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: GPSEST failure indicated by SR QITPOL: ARGUMENT OUT OF RANGE.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 28 November 2014 [BSW52 Modifications]: The bug fix B_036 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_036 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Apply paramter renaming in ADDNEQ2 consistently to the parameter removal for piece-wise linear parameter (consider left and right boundary).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 28 November 2014 [BSW52 Modifications]: The bug fix B_037 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_037 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If satellites are excluded from the processing in CODSPP due to missing orbits or satellite clock or due to an entry in the satellite problem file, they are not counted as "bad satellites" anymore in the statistics provided by the program output (and analysed by CODXTR).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 28 November 2014 [BSW52 Modifications]: The bug fix B_038 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_038 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Check consistency regarding zero- and double-difference processing in RESCHK with respect to the introduced residual summary table.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 20 November 2014 [BSW52 Modifications]: The bug fix B_033 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_033 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Wrong format in the warning message if huge numbers are reported for the "big O-C values" by MAUPRP.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 20 November 2014 [BSW52 Modifications]: The bug fix B_034 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_034 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: If the formal errors for a specific satellite are too small, the resported accuracy code is set to zero (what means suspicious satellite).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 3 November 2014 [BSW52 Modifications]: The bug fix B_030 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_030 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: "Coordinate summary" provided by GPSXTR is incorrect with respect to "DHT" results.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 3 November 2014 [BSW52 Modifications]: The bug fix B_031 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_031 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Biased degree of freedom for GPSEST computations with stochastic ionosphere parameters without elimination of reference ionosphere parameters (commonly for QIF ambiguity resolution). The direct consequence is a biased a posteriori rms of unit weight (and proportionately biased rms information for all involved parameters).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 3 November 2014 [BSW52 Modifications]: The bug fix B_032 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_032 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: RINEX3.02 header label "GLONASS COD/PHS/BIS " unknown.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 14 August 2014 New set of FES2004 OTL model coefficients starting from 14 Aug. 2014 at 07:36 UTC By Eric Pottiaux

A new set of Ocean Tide Loading (OTL) coefficients from the FES2004 model has been computed for all stations based on the lastest cumulative coordinate set. It is operationally used for all computation starting from 14 August 20014 at 07:36 UTC.

  Tue, 12 August 2014 BNC Upgraded from revision R5671 to revision R5908 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5671 to revision R5908. This includes numerous source code modifications.

  Thu, 3 July 2014 BNC Upgraded from revision R5656 to revision R5671 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5656 to revision R5671. This includes a small bugfix with respect to the GLONASS code bias generation, small cleanups in SVN metadata, update due to RTCM-SSR fixes and change lockloss handling. The IGS08.atx file was updated as well.

  Sat, 5 April 2014 BNC Upgraded from revision R5655 to revision R5656 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5655 to revision R5656. This includes a bug fix with respect to teh kalman filtering algorithm and the update of teh IGS08.atx file.

  Fri, 7 March 2014 BNC Upgraded from revision R5597 to revision R5655 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5597 to revision R5655.

  Mon, 9 December 2013 BNC Upgraded from revision R5387 to revision R5596 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5387 to revision R5596.

  Wed, 4 December 2013 Added 4 new stations from U.K. (EASN, LICF, NEWR, MACY) By Eric Pottiaux

The 4 new U.K. stations (EASN, LICF, NEWR, MACY) from OSBIGF have been added to the real-time data acquisition and to the QRTNET processing system.

  Fri, 29 November 2013 BNC Upgraded from revision R5333 to revision R5387 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5333 to revision R5387.

  Wed, 25 September 2013 [BSW52 Modifications]: The bug fix B_028 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_028 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Resolved ambiguities are not correctly displayed in the pseudo graphics.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 25 September 2013 [BSW52 Modifications]: The bug fix B_029 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_029 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: There were missing line-break characters in the source code of ROCKMD.f.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 9 September 2013 [BSW52 Modifications]: The bug fix B_027 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_027 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Coordinates from a clock RINEX file cannot be read if a coordinate component is below 1 meter.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 12 August 2013 [BSW52 Modifications]: The bug fix B_026 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_026 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Users with ifort version 12.0 could not compile the program ATX2PCV.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Fri, 9 August 2013 BNC Upgraded from revision R5330 to revision R5333 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5330 to revision R5333.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_019 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_019 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Several improvements and bug-fixes for advanced usage of ATX2PCV. (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_020 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_020 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Wrong clock RINEX result file for station clock corrections if parameters have not been pre-eliminated epoch-wise (default setting) in GPSEST. (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_021 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_021 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Diverse improvements and corrections when estimating receiver and satellite clock corrections in ADDNEQ2. (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_022 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_022 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Diverse improvements and corrections when estimating receiver and satellite clock corrections in ADDNEQ2. (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_023 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_023 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Keep the cluster files from the final GPSEST-run in the campaign after processing a session/day. (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_024 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_024 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Cosmetics for some input panels. (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 24 July 2013 [BSW52 Modifications]: The bug fix B_025 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_025 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Occasional GPSEST may crash if satellites are not in the orbit but in the observation files (with all measurements marked). (Through online update & configure.pl)

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 July 2013 2 New RGP Stations (CT3L and CT3K) have been added to the APRINET/REPRONET post-processing and to the NRTTST processing By Eric Pottiaux

The new RGP stations CT3L and CT3K have been added to the RINEX dataflow and to the APRINET/REPRONET/NRTTST processing. Older RINEX daily files have re-downloaded.

  Mon, 22 July 2013 BNC Upgraded from revision R5320 to revision R5330 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5320 to revision R5330.

  Tue, 9 July 2013 [BSW52 Modifications]: The bug fix B_017 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_017 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The example BPE RNX2SNX stops in some cases by preparing to resolve ambiguities directly in L1 and L2 with short baselines by the message "Empty list of parallel scripts".

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 9 July 2013 [BSW52 Modifications]: The bug fix B_018 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_018 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Improper behavior of ADDNEQ2 when a WGT file is used as input. The problem occurs when trying to transform apriori coordinates from NEQ file using Helmert parameters from a WGT file and the scale parameter is not being used for the transformation (flag "0").

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 8 July 2013 BNC Upgraded from revision R5309 to revision R5320 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R5309 to revision R5320.

  Mon, 1 July 2013 BNC Upgraded from revision R4649 to revision R5309 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R4649 to revision R5309.

  Thu, 27 June 2013 [BSW52 Modifications]: The bug fix B_015 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_015 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The program SNGDIF crashed if a specified cluster definition file does not exist.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 27 June 2013 [BSW52 Modifications]: The bug fix B_016 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_016 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: In the example BPE RNX2SNX, the program RESCHK, called by the user script RES_SUM (PID 331) has the following wrong input option: On panel 2 the option "Difference level of residuals in summary" should be set to SINGLE instead of ZERO.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 26 June 2013 [BSW52 Modifications]: The bug fix B_014 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_014 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The RINEX files have not been closed immediately after reading.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Wed, 19 June 2013 [BSW52 Modifications]: The bug fix B_013 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_013 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: STDDEV values are not provided in troposphere-SINEX (TRO) in case of unavailable (or deleted) troposphere gradient parameters (when using ADDNEQ2).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 13 June 2013 [BSW52 Modifications]: The bug fix B_011 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_011 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The CHKMAX message may display the wrong module where a parameter is defined.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 13 June 2013 [BSW52 Modifications]: The bug fix B_012 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_012 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: STDDEV values are not provided in troposphere-SINEX (TRO) in case of unavailable (or deleted) troposphere gradient parameters (when using ADDNEQ2).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 13 May 2013 [BSW52 Modifications]: The bug fix B_009 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_009 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: SATMRK may crash by using single frequency files.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Mon, 13 May 2013 [BSW52 Modifications]: The bug fix B_010 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_010 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The constraining of pre-eliminated station coordinate parameters was not correct.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Thu, 2 May 2013 2 New RGP Sites (CTX1 and CT1B) have been added to the E-GVAP Post-Processing and Hourly Test Procedures By Eric Pottiaux

2 New RGP Stations (CTX1 and CT1B) have been added to the E-GVAP Post-Processing procedures APRINET and REPRONET, and to the hourly test processing procedure NRTTST.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_003 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_003 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: The flag M for satellites eclipsing by the Moon in the OBGEN summary file for IGS-ACC was not printed correctly.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_004 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_004 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Changing the BPE Variable STAINF in the PPP PCFs and the variable CRXINF in the PPP, CLKDET and RNX2SNX PCFs did not have an influence on the ???_COP scripts.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_005 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_005 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Revised (misleading) warning/error message concerning different geodetic dates.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_006 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_006 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: RNXSMT for GLONASS frequency channel estimation: If there are only less observations available for a satellite than needed to obtain a valid satellite arc for data screening a wrong "estimated" frequency number is reported. With this correction it is indicated with "--" sign that the program was not able to estimate the frequency channel.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_007 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_007 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Since 25th February the satellite problem file contains negative GLONASS satellite number for a repositioning event (GLONASS-K1 as R26). This requires a new format for updating the satellite problem file using the program RESCHK.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_008 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_008 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Disregarding the serial numbers of the receiver or antenna from the input SINEX file using SNX2STA did not remove the corresponding entries from the output station information file.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_001 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_001 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Station information (.STA) files could not be displayed by the Menu correctly (Menu >Campaign >Edit station files >Station information file).

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 23 April 2013 [BSW52 Modifications]: The bug fix B_002 provided by the BSW Team has been applied. By Eric Pottiaux

The Bernese GNSS software v 5.2 has been upgraded to fix the bug B_002 by applying the bug fix provided by Astronomical Institute of the University of Bern (AIUB).

Description: Bugfix for selection of satellite systems in program RXOBV3.

Details on the bug can be found on the support pages of the Bernese GNSS software web site.

  Tue, 6 November 2012 18 New U.K. Stations Added to the E-GVAP Hourly Processing Procedures ROBH By Eric Pottiaux

18 new U.K. Stations (WEYB GORS ALDB ARDL SHOE MART DUNG SANO EXMO PRAE SCIL ANLX ADAR DARE KEYW OXFR ARGI LERI) have been added in the E-GVAP hourly processing procedures ROBH.

  Thu, 11 October 2012 BNC Upgraded from revision R4649 to revision R4756 (i.e. BNC v 2.8) By Eric Pottiaux

In order to correct some bugs, notably concerning RINEX 3.0 skeleton on epncb, the real-time GNSS data acquisition software BNC was upgraded to the last revision (4756), i.e. to BNC 2.8.

  Tue, 9 October 2012 DUB2 EPN Station in Croatia has been added to the NRTNET+QRTNET post-processing By Eric Pottiaux

The new EPN station DUB2 in Croatia (replkacement of DUBR) has been added to the RINEX dataflow and to the NRTNET processing.

  Wed, 5 September 2012 Upgrade to Hatanaka compression/decompression tools version 4.05 By Eric Pottiaux

The real-time GNSS observations aquisition procedures has been upgraded to use the Hatanaka compression/decompression tools version 4.05

  Wed, 5 September 2012 BNC Upgraded from revision R4245 to revision R4649 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R4245 to revision R4649.

  Sat, 18 August 2012 BAL2 RGP Station has been added to the APRINET/REPRONET post-processing By Eric Pottiaux

The new RGP station BAL2 has been added to the RINEX dataflow and to the APRINET/REPRONET processing. Older RINEX daily files have re-downloaded.

  Thu, 2 August 2012 RIO1 EPN Station in Spain has been added to the NRTNET post-processing By Eric Pottiaux

The new EPN station RIO1 has been added to the RINEX dataflow and to the NRTNET processing.

  Fri, 13 July 2012 RIXH New RGP Station has been added to the APRINET/REPRONET post-processing By Eric Pottiaux

The new RGP station RIXH has been added to the RINEX dataflow and to the APRINET/REPRONET processing. Older RINEX daily files have re-downloaded.

  Tue, 12 June 2012 Added AMNS 19754M001 to a priori input files By Eric Pottiaux

Added AMNS 19754M001 to CRD/CLU/ABB/CRD/PLD a priori input + Modify STA file for dome number correction (wrong dome: 19830M001 replace by 19754M001)

  Mon, 11 June 2012 Added LOWE to a priori BLQ input files using logfile information By Eric Pottiaux

New BLQ coefficient have been computed for Added LOWE 13232M001 using the a priori coordinate information in the logfile and inserted into the BLQ a priori input file

  Mon, 11 June 2012 Update PDL a priori file By Eric Pottiaux

Update a priori PLD file using the output of REPRONET.PCF 140/12.

  Mon, 11 June 2012 Added LOWE 13232M001 to a priori input files By Eric Pottiaux

Added LOWE 13232M001 to CLU/ABB/CRD a priori input files

  Mon, 11 June 2012 BNC Upgraded to the last revision (4245) By Eric Pottiaux

BNC was upgraded to the last revision (4245), i.e. to BNC 2.7, in order to correct for some bug, notably concerning L5.

  Mon, 4 June 2012 Complete update of the OTL file By Eric Pottiaux

Complete update of the FES2004.BLQ file using the latest coordinates

  Mon, 4 June 2012 Update A Priori Coordinates By Eric Pottiaux

Update A Priori Coordinates to APRINET:16894:150/2012

  Fri, 1 June 2012 Start Uploading the new ROBH solutions to E-GVAP By Eric Pottiaux

Starting on the 1st June 2012 at 11 UTC, the test ROB solution "ROBT" based on hourly RINEX GNSS observations is now provided as the new official ROB solution within E-GVAP and uploaded in the operational directory (/nrt) of the U.K. Met Office E-GVAP Hub.

  Wed, 30 May 2012 5 new RGP sites in Corsica have been added to the NRTNET.PCF processing By Eric Pottiaux

5 new RGP sites in Corsica added to NRTNET.PCF processing (TUDA,PIAN, LUCI, LUMI, SARI) - Change applied on the 30 Apr12, 18 UTC onwards.

  Wed, 30 May 2012 BNC Upgraded from revision R4194 to revision R4228 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision R4194 to revision R4228.

  Wed, 30 May 2012 Update A Priori Coordinates By Eric Pottiaux

The A Priori Coordinate file NRTNET_R08.CRD has been updated using the output of the following processing : APRINET:16894:145/2012

  Wed, 30 May 2012 6 New RGP stations have been added to the APRINET/REPRONET Processing By Eric Pottiaux

6 New RGP stations (CT1A, CTA1, CT3H, CT44, CT3I, CT5F) have been added to the RINEX dataflow and to the APRINET/REPRONET processing. Older RINEX daily files have re-downloaded.

  Fri, 25 May 2012 3 proposed EPN stations have been added the the RINEX database By Eric Pottiaux

The 3 proposed EPN stations MELI, CORT and IDLX have been added to the hourly/daily RINEX database. The data centres used are ifag, ign and olg. Older daily RINEX files have re-downloaded.

  Tue, 22 May 2012 Start Uploading the new ROBQ solutions to E-GVAP By Eric Pottiaux

Starting on 22th May 2012 at 16:00 UTC, the new low latency ROB solutions "ROBQ" based on real-time GNSS observations is distributed within E-GVAP as a test solution and uploaded to the /test/nrt directory of the U.K. Met Office E-GVAP Hub.

  Mon, 21 May 2012 BNC Upgraded from revision Rxxxx to revision R4194 By Eric Pottiaux

The BNC software used for the real-time GNSS observation acquisition was upgraded from revision Rxxxx to revision R4194 to correct a bug (systematic crash) with RT orbits and clock corrections CLK30 and IGC01.

  Tue, 15 May 2012 The AMNS RGP Station has been added By Eric Pottiaux

The RGP Station AMNS has been added to the hourly/daily RINEX database and to the APRINET/REPRONET E-GVAP post-processing procedures. Older daily RINEX files have been re-downloaded.

  Mon, 30 April 2012 2 New Station from OS/BIGF have been added to the QRTNET Processing By Eric Pottiaux

Two new station from OS/BIGF ANLX and ADAR have been added to the QRTNET processing

  Mon, 30 April 2012 Change the minimum of observation epoch in RXOBV3 for the QRTNET Processing By Eric Pottiaux

The minimal number of epoch observed for each station in RXOBV3 has been decreased from 90 epochs (45min) to 38 epochs (39 min) allowing two 5-min NTRIP files to be missing…. Changes have been applied in QRT_NET OPT dir, on 30 Apr 12 at 08:20 UTC

  Thu, 26 April 2012 10 New RGP Sites have been added to the E-GVAP Post-Processing Procedures By Eric Pottiaux

10 New RGP Stations (CHBL,CHPH,OUT2,SENS,MGIS,VDOM,DIPL,CAUS,MSMM,GRON) have been added to teh E-GVAp Post-Processing procedures APRINET and REPRONET.

  Wed, 25 April 2012 29 New RGP Stations Added to the E-GVAP Post-Processing Procedures By Eric Pottiaux

29 new RGP Station (BAST,BVSM,CERN,CRAL,CT13,CT14,CT20,CT22,CT26,CT30,CT31,CT32,CT34,CT36,CT43,CT53,CT54,CT55,CT5E,CT70,CTZ1,CDJC,GARD,GIE1,KOUG,NVPT,PIMI,PTRC,SAUN) have been added in the E-GVAP post-processing procedures APRINET and REPRONET.

  Thu, 13 October 2011 Installation of the new HPC server By Eric Pottiaux

A new HPC server has been installed to replace the old infrastructure and maintain the E-GVAP service at ROB

  Mon, 24 January 2011 Website Development By Eric Pottiaux

Start the development of a website related to the E-GVAP activities at the Royal Observatory of Belgium (ROB)

  Fri, 22 October 2010 E-GVAP Management Report 2010 By Eric Pottiaux

An E-GVAP Management report has been issued and provided at the ROB and RMI directors

  Tue, 22 June 2010 Eric Pottiaux received his Ph.D. By Eric Pottiaux

E. Pottiaux has received his degree of doctor from the Université Catholique de Louvain (UCL), Belgium, for its work on "Sounding the Earth's Atmospheric Water Vapour Using Signals Emitted by Global Navigation Satellite Systems" Click here to download the full text manuscript

  Wed, 21 March 2007 New Website Development By Eric Pottiaux

Development of a website concerning the E-GVAP activities at the Royal Observatory of Belgium (ROB) has been started.

  Thu, 1 March 2007 Re-Start of the E-GVAP Activities By Eric Pottiaux